• Carbon Steel Ball Valve Manufacturers / Suppliers in Mumbai India
  • Valves Dealers / Distributors in Pune Chennai Uae Malaysia Qatar India

Carbon Steel Ball Valve Manufacturers / Suppliers

Carbon Steel Ball Valves, Carbon Steel 4 Inch Ball Valves Suppliers, Carbon Steel ASTM A105 Ball Valves Exporters, Carbon Steel 300 lb Ball Valves India

Carbon Steel Ball Valves Dealers Distributors in Mumbai Pune Chennai India

All Types Carbon Steel Ball Valves Suppliers, All Size Carbon Steel Ball Valves Suppliers in India, All Top Brands Carbon Steel Ball Valves Dealer in India, Carbon Steel Gas Ball Valves, Carbon Steel Ball Valves for Oil Industry, Carbon Steel Ball Valves for Water, Industrial Carbon Steel Ball Valves, Carbon Steel Ball Valves - Iron Ball Valves

Carbon Steel Ball Valves Suppliers Dealers Distributors Exporters in India

Citizen Metals (ISO Certified Company) are one of the Largest Dealers of Carbon Steel Ball Valves in Mumbai India, Ball Valves that are being designed as per the national and international standard quality of raw materials. A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball (called a "floating ball") to control flow through it. It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.

THE 4 TYPES OF BALL VALVES - SINGLE BODY, SPLIT BODY, TOP ENTRY AND WELDED

  • There are four general body styles of ball valves: single body, split body, top entry, and welded. There are four general types of ball valves: full port, standard port, reduced port, and v port.
  • A full port ball valve has an oversized ball so that the hole in the ball is the same size as the pipeline resulting in lower friction loss. Flow is unrestricted, but the valve is larger.
  • A standard port ball valve is usually less expensive, but has a smaller ball and a correspondingly smaller port. Flow through this valve is one pipe size smaller than the valve's pipe size resulting in slightly restricted flow. In reduced port ball valves, flow through the valve is one pipe sizes smaller than the valve's pipe size resulting in restricted flow.
  • A v port ball valve has either a 'v' shaped ball or a 'v' shaped seat. This allows the orifice to be opened and closed in a more controlled manner with a closer to linear flow characteristic. When the valve is in the closed position and opening is commenced the small end of the 'v' is opened first allowing stable flow control during this stage. This type of design requires a generally more robust construction due to higher velocities of the fluids, which would quickly damage a standard valve.
  • A trunnion ball valve has a mechanical means of anchoring the ball at the top and the bottom, this design is usually applied on larger and higher pressure valves(say 4 inch and above 600 psi and above)
  • Manually operated ball valves can be closed quickly and thus there is a danger of water hammer. Some ball valves are equipped with an actuator that may be pneumatically or motor (electric) operated. These valves can be used either for on/off or flow control. A pneumatic flow control valve is also equipped with a positioner which transforms the control signal into actuator position and valve opening accordingly.

Citizen Valves has extensive experience in manufacturing Trunnion Mounted, Side & Top Entry Ball Valves, both Soft and Metal Seated.

ASTM A105 Ball Valve, 300 LB, 4 Inch, RF, Supplies Ball Valve, 300 lb (PN50), 4 Inch (DN100), Flanged RF Ends, API 6D, API 598, ASME B16.10

Design standard: API 6D.
Body material: A105.
Nominal diameter: 4 inch (DN100).
Pressure: 300 lb (PN50).
End connection: RF.
Face to face: ASME B16.10.
Working temperature: -29℃~+427℃.
Test and inspection: API 598.

Product Range
Body Material: Carbon steel, Stainless steel, Alloy steel.
Normal diameter: 2"~60" (DN50~DN1500).
End connection: BW, Flanged.
Pressure range: 150 LBs~2500 lbs (PN16~PN420).
Operation: Lever, Gearbox, Electric, Pneumatic, Electro hydraulic actutor, Gas over oil actuator.
Working temperature: -46℃~+200℃.

For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Fire Safe, Butt Weld ISO Mount End

BM-590-CS-R-66-FS-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Conventional port, Blowout-proof stem, Enclosed bolt design, Reinforced PTFE seats, Stainless steel ball and stem, Cast ISO mounting pad, Vented ball, Locking lever handle, Butt weld end connections
  • Conforms to MSS SP-110, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 2"
For More Info Please Contact.

Unibody Carbon Steel Ball Valve - Class 150, Fire Safe

F-510-CS-R-66-FS
  • Valve pressure rating 285 psi 19.7 bar non-shock cold working pressure, Max temperature rating 400°F, Conventional port, Blowout-proof stem, Stainless steel ball and stem, Mounting pad, Fire safe, Vented ball, Locking handle or manual gear operator, Class 150 flanged end connections
  • Conforms to MSS SP-72, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 12"
For More Info Please Contact.

Split-body Carbon Steel Ball Valve - Full Port, Class 150

F-515-CS-F-66-FS
  • Valve pressure rating 285 psi 19.7 bar non-shock cold working pressure, Max temperature rating 400°F, Split body, full port design, Blowout-proof stem, Stainless steel ball and stem, Multiple V-ring packing, Mounting pad, Vented ball, Locking handle or manual gear operator, Class 150 flanged end connections
  • Conforms to MSS SP-72, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 12"
For More Info Please Contact.

Unibody Carbon Steel Ball Valve - Class 300, Fire Safe

F-530-CS-R-66-FS
  • Valve pressure rating 740 psi 51 bar non-shock cold working pressure, Max temperature rating 400°F, Blowout-proof stem, Stainless steel ball and stem, Mounting pad, Vented ball, Locking handle or manual gear operator, Class 300 flanged end connections
  • Conforms to MSS SP-72, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 10"
For More Info Please Contact.

Split-body Carbon Steel Ball Valve - Class 300, Full Port

F-535-CS-F-66-FS
  • Valve pressure rating 740 psi 51 bar non-shock cold working pressure, Max temperature rating 400°F, Split body, full port design, Blowout-proof stem, Stainless steel ball and stem, Multiple V-ring packing, Mounting pad, Vented ball, Locking handle or manual gear operator, Class 300 flanged end connections
  • Conforms to MSS SP-72, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 12"
For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Full Port, Stainless Steel Trim, Socket Weld

K-595-CS-R-66-LL
  • Valve pressure rating 1000 psi 69 bar non-shock cold working pressure, Max temperature rating 400°F, Full port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Locking lever handle, Socket weld end connections
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Fire Safe, Socket Weld ISO Mount End

KM-590-CS-R-66-FS-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Conventional port, Blowout-proof stem, Enclosed bolt design, Reinforced PTFE seats, Stainless steel ball and stem, Cast ISO mounting pad, Vented ball, Locking lever handle, Socket weld end connections
  • Conforms to MSS SP-110, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 2"
For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Full Port, Socket Weld ISO Mount

KM-595-CS-R-66
  • Valve pressure rating 1000 psi 69 bar non-shock cold working pressure, Max temperature rating 400°F, Full port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Locking lever handle, Socket weld ISO mount
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

One-Piece Carbon Steel Ball Valve - Reduced Port, Fire Safe

T-560-CS-R-25-FS-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Reduced port, Blowout-proof stem, Stainless steel ball and carbon steel stem, Vented ball, Locking lever handle, Threaded end connections
  • Conforms to MSS SP-110, API-607 Fourth Edition Fire Safe
  • Size range 1/4" to 2"
For More Info Please Contact.

One-Piece Carbon Steel Ball Valve - Reduced Port, Locking Lever Handle

T-560-CS-R-25-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Reduced port, Blowout-proof stem, Stainless steel ball and carbon steel stem, Vented ball, Threaded end connections, Standard lever handle or locking lever
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

One-Piece Carbon Steel Ball Valve - Stainless Steel Trim, Fire Safe

T-560-CS-R-66-FS-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Reduced port, Blowout-proof stem, Stainless steel ball and trim, Vented ball, Threaded end connections, Locking lever handle
  • Conforms to MSS SP-110, API-607 Fourth Edition Fire Safe
  • Size range 1/4" to 2"
For More Info Please Contact.

One-Piece Carbon Steel Ball Valve - Reduced Port, Stainless Steel Trim

T-560-CS-R-66-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Reduced port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Locking lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

One-Piece Carbon Steel Ball Valve - Carbon Steel Trim

T-570-CS-R-25
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure (1/2" to 1"), Valve pressure rating 1500 psi 103 bar non-shock cold working pressure (1-1/4" to 2"), Max temperature rating 400°F, Reduced port, Blowout-proof stem, Chrome plated carbon steel ball, carbon steel stem, Vented ball, Standard lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 1/2" to 2"
For More Info Please Contact.

One-Piece Carbon Steel Ball Valve - Reduced Port, Stainless Steel Trim

T-570-CS-R-66
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure (1/2" to 1"), Valve pressure rating 1500 psi 103 bar non-shock cold working pressure (1-1/4" to 2"), Max temperature rating 400°F, Reduced port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Threaded end connections, Standard lever handle
  • Conforms to MSS SP-110
  • Size range 1/2" to 2"
For More Info Please Contact.

Two-Piece Carbon Steel Ball Valve - Conventional Port, Carbon Steel Trim

T-580-CS-R-25
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure (3/8" to 1"), Valve pressure rating 1500 psi 103 bar non-shock cold working pressure (1-1/4" to 2"), Max temperature rating 400°F, Conventional port, Blowout-proof stem, Stainless steel ball and carbon steel stem, Vented ball, Standard lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 3/8" to 2"
For More Info Please Contact.

Two-Piece Carbon Steel Ball Valve - Conventional Port, Stainless Steel Trim

T-580-CS-R-66
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure (1/4" to 1"), Valve pressure rating 1500 psi 103 bar non-shock cold working pressure (1-1/4" to 2"), Max temperature rating 400°F, Conventional port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Standard lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Full Port, Stainless Steel Trim, Threaded

T-595-CS-R-66-LL
  • Valve pressure rating 1000 psi 69 bar non-shock cold working pressure, Max temperature rating 400°F, Full port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Locking lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

Two-Piece Carbon Steel Ball Valve - Conventional Port, Cast Mounting Pad

TC-580-CS-R-25-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Conventional port, Blowout-proof stem, Stainless steel ball and carbon steel stem, Cast ISO mounting pad, Vented ball, Locking lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

Two-Piece Carbon Steel Ball Valve - Conventional Port, Stainless Steel Trim

TC-580-CS-R-66-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Conventional port, Blowout-proof stem, Stainless steel ball and stem, Cast ISO mounting pad, Vented ball, Locking lever handle, Threaded end connections
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"
For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Fire Safe, Threaded ISO Mount End

TM-590-CS-R-66-FS-LL
  • Valve pressure rating 2000 psi 138 bar non-shock cold working pressure, Max temperature rating 400°F, Conventional port, Blowout-proof stem, Enclosed bolt design, Reinforced PTFE seats, Stainless steel ball and stem, Vented ball, Locking lever handle, Cast ISO mounting pad, Threaded ISO mount end connections
  • Conforms to MSS SP-110, API-607 Fourth Edition Fire Safe, API-608 Anti-Static
  • Size range 1/2" to 2"
For More Info Please Contact.

Three-Piece Carbon Steel Ball Valve - Full Port, Threaded ISO Mount

TM-595-CS-R-66
  • Valve pressure rating 1000 psi 69 bar non-shock cold working pressure, Max temperature rating 400°F, Full port, Blowout-proof stem, Stainless steel ball and stem, Vented ball, Locking lever handle, Threaded ISO mount
  • Conforms to MSS SP-110
  • Size range 1/4" to 2"

OTHERS VALVE

We are experienced to supply valves in piping projects in many industries can be provided several kinds, such as:

  • Ball Valves
  • Gate Valves
  • Globe Valves
  • Check Valves
  • Butterfly Valves
  • Plug Valves
  • Diaphragm Valves
  • Solenoid controlled Valves
  • Valves with Hydraulic/Penumatic/Electric Actuators
  • Floating Valves
  • Safety Valves
  • Special control valves are available by customer request.

Size:

  • 1/4" to 72" class 150 to 2500 for Ball Valves
  • 3/8" to 56" class 150 to 4500 for Gate, Globe and Check Valves
  • 1/2" to 40" class 150 to 600 for Butterfly Valves
  • 1/2" to 24" class 150 to 300 for Diaphragm Valves
    Other sizes and ratings available.
    Please see our valves catalogue for more information or contact our office.

Materials: 
Body and Trim:

  • Carbon Steel ASTM A105, A216WCB, A350LF2 & etc. 
  • Alloy Steel ASTM A29, A217 grades WC1, WC6, WC9, C5, C12, CA15 and etc.
  • Steel for low temperature services such as ASTM A352 grades LCB, LCC, LC1, LC2, LC3, LC4, LC9 and etc.
  • Stainless Steel Cast body such as ASTM A351 grades CF3, CF8, CF3M, CF8M, CF8C, CN7M, CD4 MCu and etc.
  • Forged body or trim ASTM A182 grades F5, F6a, F11, F22, F44, F51, F53, F55, F304, F304L, F316, F316L, F316Ti, F320, F321, F347 & etc.
  • Duplex and Super Duplex Stainless steels
  • Nickel super alloys such as Monel®, lnconel®, lncoloy®, Hastelloy® &etc.
  • Titanium alloys
  • Brass and Bronze alloys
  • Plastic valves from PTFF, EPDM, PVDF, PA and etc.
  • Other alloys according to request
  • Ball Valves
  • Gate Valves

Coating:

  • ENP
  • Chromium Carbide
  • Stellite 

Seats and Seals:

  • Carbon, Graphite or Bronze filled PTFE
  • PTFE (Teflon)T
  • PTFE spring energized
  • PFA 
  • Graphite
  • Delrin
  • Viton
  • Nylon
  • Glass filled PTFE
  • PCTFE (KEL-F)
  • Peek
  • Vespal
  • Nitrile
  • Terban
  • Turcite

Connection:

  • Threaded NPT
  • Butt Welding
  • Socket Welding
  • Flanged according to ANSI, DIN, BS, JIS

Standards:

Our valves are produced according to under mentioned or any other standards:

API

6A - 6D - 6FA - 600 - 607 - 598 - Q1

ANSI

B16.5 - B16.10 - B16.25 - B16.34 - B31.3

ASTM

E94 - E142 - E165 - E186 - E280 - E446 - E709

DIN

5752

BS

1503 - 1504 - 1560 - 2080 - 4504 - 5146 - 5155 - 5351 - 5750 - 5871 - 6755

MSS

SP25 - SP44 - SP53 - SP54 - SP55 - SP61 - SP72 - SP82

  • DELIVERY :

  • Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
  • Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports

Citizen Metals (ISO Certified Company) is the world's Largest Distributor for all Brand Valves Like : L&T Valves, Audco Valves, Hawa Valves, Beena Valves, Shenco Valves, Peco Valves, Vag Valves, Advance Valves, Gg Valves, Sir Valves, Jyoti Valves, Hp Valves, Microfinish Valves, Scorpio Valves, Expert Valves, Kbl Valves, Kirloskar Valves, Ksb Valves, Forbes Valve, Neta Valves, Nisha Valves, Seal Excel Check Valve, Gm Valve, Mala Valves, Aarko Valves, Sant Valves, Normex Valves, Hammer Valves, Rmw Valves, Zoloto Valves

lnt valves audco valves hawa valves zoloto valves

huge selection with great pricing on all Carbon Steel Ball Valves / Carbon Steel Astm A105 Ball Valves Suppliers in India, 4 Inch Carbon Steel Ball Valves Suppliers in India

Industrials Valves Dealers & Distributors in India | Industrial ball valves manufactured to your requirements. Contact us today!

Carbon Steel Ball Valves Recent Price List 2017-18

Carbon Steel Ball Valves Price
FOB Price: US $1-460.0 / Piece

Carbon Steel 4 Inch Ball Valves Price
FOB Price: US $1-460.0 / Piece

ASTM A105 Ball Valve Price, 300 LB, 4 Inch Price
FOB Price: US $1-460.0 / Piece


Types of Ball Valves

• Inline Ball Valves 2 Piece Valves
• Inline Ball Valves 3 Piece Valves
• Mini Ball Valve
• Inline Mini Ball Valves 3 Piece Valves
• Inline Ball Valves Seal Welded Valves
• Ball Valve
• Inline Fire Safe Ball Valves
• Inline Pneumatic Actuated Ball Valves
• Inline Pneumatic Actuated Ball Valve
• Inline Ball Valves
• Way Sanitary Ball Valve
• Way Ball Valves
• Electric Actuated Ball Valves

 

• Water Thief Valves
• Way Ball Valve
• Inline Fire Safe Ball Valves
• Inline Mini Ball Valve
• Wye Ball Valves
• Mnpt X Fnpt Ball Valve
• Electronic Actuated Ball Valves
• 3 Way Sanitary Ball Valves
• Siamese Ball Valves
• Flanged X Flanged Ball Valves
• Fnpt X Fnpt Ball Valves
• Mnpt X Fnpt Ball Valve
• Socket X Socket Ball Valves
• Top Entry Ball Valves
• Entry Ball Valves ASME Classes 150, 300 and 600

 

Ball Valves Ready Stock Available

Ball Valves ARC 210 BV
Ball Valves ARC BV 6K PT
Ball Valves ARC BV 6K T
Ball Valves ARC BV 6K
Ball Valves ARC BV 6K 3PT
Ball Valves ARC BV 6K 3FF
Floating Ball Valve
High Pressure Ball Valves
Industrial Valve Ball Valves
2 Inch Ball Valves
Ball Valves For Steam
Flanged Ball Valves
One Piece Ball Valves
Threaded Ball Valves
Socket Weld Ball Valves
Three Piece Ball Valves
Lockable Ball Valves
Mini Ball Valves
Panel Mount Ball Valves
4 Inch Ball Valves
Hydraulic Ball Valves
Pneumatic Ball Valves
Reduced Bore Ball Valves
Uses Ball Valves
Three Way Ball Valves
3pc Ball Valves
Wafer Ball Valves
V Ball Valves
8 Ball Ball Valves
Sanitary Ball Valves
1.5 Inch 3 Piece Ball Valves
Manual Ball Valves
1000 Bar Ball Valve
3000 Psi Ball Valve
Kitz Ball Valves
Turn Ball Valves
Hollow Ball Valves
Parker Ball Valves
Ermeto Ball Valves
Trunnion Ball Valve
Ball Valve For Air
Ball Valve For Water
Ball Valve For Gas
Gas Ball Valve
Non Fire Safe Design Ball Valve
Stainless Steel Ball Valve
SS Ball Valve
Hydraulic Ball Valve
Inconel Ball Valve
Hastelloy Ball Valves
Monel Ball Valve
Alloy Steel Ball Valve
Carbon Steel Ball Valve
Duplex Steel Ball Valve
254 Smo Ball Valve
904l Stainless Steel Ball Valve
Cu-Ni 90/10 Inline Ball Valves
Titanium Ball Valves
Brass Ball Valve
Sweat Ball Valves
1 Inch Ball Valves
Full Bore Ball Valves
Hand Ball Valves

Project Reference :

PROJECT

YEAR

Project : Water treatment plant at Malawi, AFRICA.

1984

Project : Ambatale Raw Water Intake Pump Station, SRILANKA.

1985

Project :  Synthetic Fibre Plant, INDONESIA.

1991

Project  :     Water  Treatment  Plant  for  Phoenix-II  Paper plant, THAILAND.

1992

Petron Civil Engineering Ltd., Bombay

1992

Project : Water Supply Project, MAURITIUS.

Paharpur Cooling Towers Ltd., Calcutta Project :  National Petrochemical Co., IRAN

1993

Ion Exchange India Ltd., Project: In INDONESIA

1993

GEPL Holdings Pte. Ltd., SINGAPORE. Project : In PAKISTAN

1997

UEM Inc., USA

1998

Project: Shah Alam Sewage treatment plant, MALAYSIA

Environmental Engineering Services (Asia)Pte. Ltd., Singapore.

1999

Project : Taman Plangi Indah Phase-1 Sewage Treatment Plant, MALAYSIA.

Gulfar Engineering & Contracting LLC, OMAN.
Project: Salalah Sewage Pumping plant , Muscat, OMAN. CONULTANTS : Parsons Engineering Science, Inc

2000

Risterm Negoce SA, Belgium.
Project : Sappi Paper Mills , BELGIUM.

2004

Saudi Berkefeld Filter Co. Ltd., Riyadh, Saudi Arabia Project : Al-Qurayat SWT and Rafha  wastewater  treatment Plant, SAUDI ARABIA
CONSULTANTS : Tawafiq Engineering  Consultant  office and Al-Tawfeek Office, SAUDI ARABIA  (Through   Jash Schutte Industrie service  GmbH,Germany
)

2004

Metax Engineering Corporation, Singapore
Project : Kim Chuan STW – Contract 2, SINGAPORE

2004

A. K. Almoayed Group WLL, Baharain
Project : #49905, Pumping Station E4, Habib Awachi, BAHRAIN.
CONSULTANTS: Watson Khonji Consulting Engineers, Bahrain.

2004

Satria Damai SDN BHD, Malaysia Project : SMART, MALAYSIA.
CONSULTANTS : MM Consultants SDN. BHD.

2004

Risterm Negoce, Belgium
Project : Sappi Paper mills , BELGIUM

2004

AVM International Ltd. A/S, Norway Project : Yapisal Erzurum, TURKEY
CONSULTANTS: ER-GE Design Engg. Consultant & Trade Ltd. Co., Istanbul

2005

Stealth valve & Controls Ltd., Canada
Project : Seymour- Capilano Filtration Project, Greater Vancouver water District., CANADA
CONSULTANTS : SSBV Consultants Inc.,

2005

Comfort Rich Enterprises Limited , Hongkong
Project : WSD Tuen  Mun Stage 5 Project, HONGKONG

2005

ROFI UK Ltd./ Syl-Mac International
Project : Erbil-Ifraz water project, IRAQ by Fluor AMEC LLC, Dubai.

2005

ROFI UK Ltd./ Syl-Mac International
Project : Nasiriya Water Project, IRAQ by Fluor AMEC LLC, Dubai

2005

ROFI UK Ltd./ Syl-Mac International
Project : Balad Rooz Water Project, IRAQ by Fluor AMEC LLC, Dubai

2005

Degremont.,
Project : Bangkhen Water Treatment Plant at Bangkok, Contract No. G-BK-7, THAILAND
CONSULTANTS: Nihon Suideo Consultants Co. Ltd. In Associated with Team Consulting Engineering and Management Co. Ltd., Thailand.

2005

Stealth valve & Controls Ltd., Canada
Project : Seymour- Capilano Filtration Project, Greater Vancouver water District., CANADA
CONSULTANTS : SSBV Consultants Inc.,

2005

Metax Engineering Corporation Limited, Singapore. Project – Tuas pumping station of PUB, SINGAPORE

2006

UEM India Limited, N. Delhi, Project : Pig farm project, MEXICO

2006

AVM International Limited, Norway Project : Water treatment plant, GHANA

2006

Spaans Babcock Limited, England, Project :- Liandysul WWTW

2006

Comfort Rich Enterprises Limited, Hong Kong, Project : Shatin project, HONGKONG

2006

ROFI UK Ltd. UK for Fluor AMEC LLC , Project :  Nasiriya Water Project, IRAQ.

2006

Kruger A/S Denmark.
Project : Oset Water Treatment Plant, Oslo, NORWAY

2006

Perrier  Sorem,  France, Project: - Paul Bert, FRANCE.

2007

Ebara Corporation Japan,
Project: - Astana City project, KAZAKHSTAN. CONSULTANTS : NJS Consultants Co. Ltd.

2007

Environmental engineering Services, Oman,
Project: - Nizwa Sewerage Treatment Plant, OMAN. CONSULTANTS : National Engineering Services Pakistan & Partners.

2007

The National Co. For Mech. & Elect. Works Ltd., Kuwait Project: MPW – Construction of A4 Pumping Station, KUWAIT, Contract SE/69
CONSULTANTS: Gulf Consultant, Parsons Engg. Co. Kuwait

2007

Aqua Tech International, Oman, / Contractors Technical Services Co. LLC, Oman.
Project: Mukhaizana MVC Project, OMAN

2007

Shutte GmbH, Germany CONSULTANTS : UHDE, Germany

2007

Paramount Limited, Baroda
Project: Petrotrin Refinery Project, TRINIDAD & TOBAGO.
CONSULTANTS : Bechtel.

 

2007

Syl Mac International, Mumbai.
Project : Cheung Sha catchwater, HONG KONG.

2007

A.   K. Almoayed Group WLL, Baharain,
Project : A4 pumping station, BAHRAIN by Habib Awachi
CONSULTANTS: Watson Khonji Consulting Engineers, BAHRAIN

2007

A.   K. Almoayed Group WLL, Baharain,
Project : SAAR Sewarage Scheme BAHRAIN, by Habib Awachi,
CONSULTANTS: Watson Khonji Consulting Engineers, BAHRAIN

2007

Comfort Rich Enterprises Limited, Hong Kong, Project : Tai Po project , HONGKONG

2007

Perrier Sorem, France,
Project :- Cyco FOS – 480 MW Power project, FRANCE by Alstom, France.

2007

Comfort Rich, Hong Kong.
Project: - Kwun Tong Pumping Station, HONG KONG

2007

Spanns Babcock, U.K.
Project: Thames Water Supply Project. CONSULTANTS :

2007

Comfort Rich Supplies Co., Ltd, Hong Kong.
Project : Shatin STW Replacement project, HONG KONG

2007

Syl Mac International, Mumbai. Project : HONG KONG

2007

Project : Cheung Sha catchwater, HONG KONG.

2007

Ryoden Engineering Co., Ltd., Hong Kong.
Project : Nam Sang Wai SPS, Sha Po SPS, Kam Tin SPS, HONG KONG.
CONSULTANTS :

2008

Ryoden Engineering Co., Ltd., Hong Kong.
Project : Nam Sang Wai SPS, Sha Po SPS, Kam Tin SPS, HONG KONG
CONSULTANTS :

2008

Comfort Rich Supplies Co., Ltd, Hong Kong.
Project : Sheung Wan Storm water PS. HONG KONG.

2008

WB Engineering & Consultancy Pte. Ltd., China Project : Punggol Serangoon PS, Intake Structure & Ancillary Works, SINGAPORE.
CONSULTANTS : CPG Consultants Pte. Ltd, Singapore.

2008

Comfort Rich Supplies Co., Ltd, Hong Kong. Project : Shatin Storm water PS. HONG KONG.

2008

WB Engineering & Consultancy Pte. Ltd., CHINA. Project : ULU Pandan Tidal gate, SINGAPORE. CONSULTANTS :

2008

Star Steel International LLC, Dubai Project : Rebar Mill, Dubai.
Consultant : MECON

2008

Project : Astana Water Supply and Sewerage Project KAZAKHSTAN.
CONSULTANTS : NJS Consultants Co. Ltd.

2008

   

WB Engineering & Consultancy Pte. Ltd., China Project : Punggol Serangoon PS, Intake Structure & Ancillary Works, SINGAPORE.
CONSULTANTS : CPG Consultants Pte. Ltd, Singapore.

2008

WB Engineering & Consultancy Pte. Ltd., China Project : SINGAPORE.

2008

Dutco Tennant LLC, Dubai
Project : NASS Contracting Co. WLL, BAHRAIN CONSULTANTS : Watson Khonji Consulting Engineers, BAHRAIN

2008

Dutco Tennant LLC, Dubai
Project : NASS Contracting Co. WLL, BAHRAIN CONSULTANTS : Watson Khonji Consulting Engineers, BAHRAIN

2008

Ebara Corporation Japan,
Project: - Astana City project, KAZAKHSTAN. CONSULTANTS : NJS Consultants Co. Ltd.

2008

A.K. Almoayed Group WLL, Baharain, Project : A1 Pumping Station, BAHRAIN Al Hassanain mechanical Co.,
Consultant : Watson Khonji .

2008

Degremont Limited, Gurgaon, India
Project: - Nhon Trach Water Supply Project, VIATNAM CONSULTANTS : Nippon Koei Co.Ltd., JAPAN and Nihon Suido Consultant Co., Ltd., VIATNAM

2008

Global Engineering Systems FZ, Sharjah, UAE Project: -
CONSULTANTS :

2009

Comfort Rich Supplies Co., Ltd, Hong Kong. Project: Ma On Shan SPS, HONG KONG CONSULTANTS :

2009

Kharafi National KSC (Closed), Kuwait
Project: MPW – Construction of A4 Pumping Station, KUWAIT, Contract SE/69
CONSULTANTS: Gulf Consultant, Parsons Engg. Co. Kuwait

2009

Kharafi National KSC (Closed), Kuwait
Project: MPW – Construction of A4 Pumping Station, KUWAIT, Contract SE/69
CONSULTANTS: Gulf Consultant, Parsons Engg. Co. Kuwait

2009

Spanns Babcock Ltd., U.K.
Project: Howdon WWTW Project UK CONSULTANTS :

2009

Spanns Babcock Ltd., U.K..
Project: Thames Water Supply Project UK CONSULTANTS :

2009

Astra Marketing Limited, Bangkok, Thailand.
Project: MWA’s Raw Water Pumping Station No. 1 at Bang Khen WTP, Bangkok, THAILAND.
CONSULTANTS :

2009

Gulf Petrochemical Services & Trdg. LLC, Oman
Project: C-170, Rushtaq Sewage Pumping Station, OMAN CONSULTANTS :

2009

Lutz-Jesco Middle East FZE, Sharjah, U. A. E. Project:
CONSULTANTS :

2009

PLS France for Degremont Ltd., France.
Project: Al Dur Independent Water & Power Project, BAHRAIN
CONSULTANTS :

2009

PVT Engineering SDN BHD, Malaysia Project: Kepala Batas, MALAYSIA CONSULTANTS : RPM Engineers SDN BHD

2009

WB Engineering & Consultancy Pte. Ltd., China
Project : Contract 6, Punggol Serangoon Reservior Scheme, SINGAPORE.
CONSULTANTS : CPG Consultants Pte. Ltd, Singapore.

2009

Dutco Tennant LLC, Dubai
Project : Shk Khalifa Highway Project, BAHRAIN CONSULTANTS : Watson Khonji Consulting Engineers, BAHRAIN

2009

Are you looking for a reliable Stainless Steel 304/316 Ball Valves dealer & distributor in below countries:

close India
close United States
close UK
close China
close Japan
close Iran
close Indonesia
close Singapore
close South Korea
close Colombia
close Germany
close Malaysia
close Nigeria
close Iraq
close Turkey
close Oman
close Venezuela

close Taiwan
close Canada
close Bangladesh
close Mexico
close Saudi Arabia
close Kuwait
close Brazil
close Netherlands
close South Africa
close Tanzania
close Israel
close Spain
close Qatar
close Thailand
close Australia
close UAE

Origin: Indian Origin, Japanese Origin, Korean Origin, European Origin, US Origin, Ukraine Origin, Russian Origin

OUR SUMMARY:
Review Date
Reviewed Product
Carbon Steel Ball Valves
Author Rating
5Carbon Steel Ball ValvesCarbon Steel Ball ValvesCarbon Steel Ball ValvesCarbon Steel Ball ValvesCarbon Steel Ball Valves